Fiddes Exterior High Build Wood Oil
£29.40 – £58.80
A blend of natural oils & resins offering a transparent satin finish with exceptional durability and resistance for all external joinery & woodwork.
Fiddes Exterior High Build Wood Oil
Produces a clear, quick drying, water repellant and weather resistant finish that will not peel or flake when applied following directions below.
Contains UV Filters and is VOC compliant.
To maintain/renovate, re-apply following guidelines below.
NOTES
Always test on a small area prior to major application.
Ensure timber is dry and has been treated with preservative
Minimum 3 coats recommended
Longer drying periods many occur during application in cold, damp or humid conditions.
Coat all areas thoroughly to seal. Refinish annually.
| Preparation | Ensure all surfaces are clean, dry, and free from any previous finish. Remove any fungal growth, dirt or moss on old wood prior to application, and ensure a preservative has been applied. Sand the substrate with a medium 120 grade sanding paper or 120 grade sanding disk, removing all traces of dust. |
|---|---|
| Application | Apply in dry conditions. Always test on a small area prior to initial application. No primer required. Minimum 3 coats recommended. Fiddes Exterior High Build Wood Oil is formulated for application directly, and does not require thinning. |
| First Coat | Stir contents thoroughly before and during use. Apply using a good quality bristle or synthetic brush and apply EVENLY and THOROUGHLY, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Sand lightly with fine 320 grade sand paper. |
| Second Coat | Apply as first coat, evenly, allowing good ventilation. Leave to dry 4-6 hours in warm, dry conditions, or preferably overnight. |
| Third Coat | Apply as above. Clean applicators with White Spirit. |
| Re application | To renovate previous application of Fiddes Exterior High Build Wood Oil, lightly sand area with 150 grit sandpaper and re-apply |
| Coverage | A single application will approximately cover 20-24 square meters per litre, depending on density of substrate |
| Size | 1lt, 2.5lt, (3lt Promo can while stocks last) |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Osmo Anti-Slip Decking Oil Clear 430
£27.00 – £82.07Select options This product has multiple variants. The options may be chosen on the product page -
Osmo UV Protection Oil Clear
£1.46 – £79.56Select options This product has multiple variants. The options may be chosen on the product page -
Sadolin Extra Durable Clearcoat
£31.92 – £61.80Select options This product has multiple variants. The options may be chosen on the product page -
Osmo UV-Protection Oil Tints for Exterior
£1.46 – £88.34Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.