Fiddes Tinted Satin Hard Wax Oil Sample Sachet 5ml
Fiddes Tinted Satin Hard Wax Oil Sample Sachet 5ml

£2.40

Select options
Shopping Cart

No products in the cart.

Fiddes Tinted Satin Hard Wax Oil Sample Sachet 5ml

£2.40

Fiddes Hardwax Oil

Fiddes Hard Wax Oil is a blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.

Produces a quick drying, natural satin / matt water repellent, tread-fast finish that will not peel or flake. To maintain / renovate, simply wash, buff or re-apply, following the guidelines below.

A range of 13 tinted satin Hard Wax Oils offers excellent depth of colour and clarity.
With the exceptions of White, Belgium Grey and Natural, a single coat of Tinted Hard Wax Oil is recommended and then finished with Clear Hard Wax Oil.

COLOURS:

American; Antique; Belgium Grey; Dark Oak; English; Graphite Grey; Light Oak; Onyx; Rustic Oak; Smoked Oak; Walnut; Whiskey; White

PREPARATION:
Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust.

APPLICATION:
Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.
FIRST COAT
Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, and lay EVENLY, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight.
SECOND COAT
Apply as first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit. When the surface area is completely dry, a light buff will further enhance the sheen level.
RENOVATION
To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.

COVERAGE:
A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.

Other Available Sizes: 250ml, 1lt, 2.5lt

Suitable for application onto children’s toys – EN 71-Toy Safety Certification
Resistant to liquids: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS3900 E15

Weight 0.01 kg
Colour / Sheen: American

, , , , , , , , , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.