The Osmo UV LED Smartlight Pro Lamp cures Osmo LED Smart-Oil in seconds, helping professionals reduce downtime and accelerate project completion. Designed specifically for use with Osmo LED Smart-Oil, it delivers the wavelength and intensity required for rapid, reliable curing.
The Osmo UV LED Smartlight Pro Lamp is the key component of the Osmo LED Smart-Oil system, delivering the specialised UV LED light required to cure the finish in seconds rather than days.
Developed specifically for professional wood finishers, furniture makers, joiners and commercial contractors, the Smartlight Pro Lamp allows Osmo LED Smart-Oil to achieve a fully cured finish almost immediately after application. This dramatically reduces project turnaround times, eliminates lengthy curing periods and helps keep workshops moving efficiently.
Unlike standard UV torches, workshop lights or sunlight exposure, the Smartlight Pro Lamp has been engineered to provide the precise wavelength and intensity needed for reliable curing. When used as part of the Osmo LED Smart-Oil system, it produces a durable, water-resistant, food-safe and toy-safe finish that can be put into service almost immediately.
For professional users looking to maximise productivity, reduce downtime and transform the way they finish timber, the Smartlight Pro Lamp is an essential part of the process.
IMPORTANT SAFETY INFORMATION: Observe the manufacturer’s operating instructions. During operation, intense UV light is emitted, which can damage eyes and skin and reflected light can be just as dangerous as direct light:
Do not look directly into the switched-on lamp (risk of blindness).
Always wear approved UV protective goggles or a UV protective shield (EN166:2002).
Wear clothing that covers the skin to prevent burns. Use additional suitable skin protection (sunscreen).
Never point the switched-on lamp at people or animals.
Do not leave the switched-on lamp on any surface, as it will burn after only a few seconds.
Weight
10 kg
ADVICE
Always maintain a consistent distance from the surface during curing.
Move the lamp evenly across the coated area to ensure uniform results.
Ensure the oil has been applied evenly before beginning the curing process.
The Smartlight Pro Lamp is designed to work as part of the complete Osmo LED Smart-Oil system. Generic UV torches, workshop lights, and sunlight exposure are not suitable substitutes.
Keep the lamp lens clean and free from dust or contamination.
USAGE
Prepare the surface and apply Osmo LED Smart-Oil (see product listing).
Switch on the UV LED Smartlight Pro Lamp.
Hold the lamp approximately 2–10cm above the coated surface.
Move the lamp evenly across the entire treated area to ensure complete curing.
The finish is ready for immediate use once curing is complete.
BENEFITS
Delivers the correct wavelength and intensity for reliable curing.
Helps achieve a fully cured finish in seconds.
Reduces project turnaround times by eliminating lengthy drying and curing periods.
Fully portable and suitable for workshop and on-site use.
Comes complete with protective case that also contains power cable, and two pairs of protective eye glasses (with cleaning cloths).
