WOCA Worktop Oil

A highly water- and dirt-repellent oil for wood surfaces.

Worktop Oil is designed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface highly water -and dirt-repellent. Use Worktop Oil, Natural, on both dark and light wood species – such as mahogany, merbau, teak, cherry, ash, oak, beech, maple, birch, pine etc. – to give the wood a mellow, golden colour. Use Worktop Oil, White, to lighten up the wood or give it a whitewashed effect.

Available in:
0.75 litre

Consumption:
12-15 m2/l 129-161 sq.ft./l

How to apply

Step 1
If the surface is particularly smooth, sand the surface with sandpaper grit 180. Make sure the wood is dry and devoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours.

Step 2
Stir the oil thoroughly before use. *Use a paintbrush to apply a suit­able amount of oil in an even, adequate coat

Step 3
Wait approx. 20-30 minutes at 20º C as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet in wet lengthwise the wood grain with sandpaper grit 320-400. Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface.

Step 4
Carefully polish the wood using a white polishing pad, which makes the surface more hard-wearing. *Repeat the treatment on highly absorbent surfaces. *The oil is thoroughly hardened after 24 hours at 20º C. Do not let the tabletop become wet during the hardening process. Maintenance: Use Worktop Oil to maintain the tabletop four times a year, or as often as necessary. Always clean the worktop first using Wood Cleaner. Follow the same procedure, but apply only one coat of oil. Risk of self-ignition: Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.

  Worktop Oil Product Information

  Worktop Oil Safety Data Sheet