Rubio Monocoat Tannin Remover
Prices From £11.94 to £24.00

Rubio Monocoat Tannin Remover is a ready-to-use product for removing stains and spots on wood caused by a reaction to acid and water. These spots tend to occur after coming into contact with moisture and metal.  The product can be used on untreated, oiled and waxed surfaces. Also suitable for outdoor applications!

• ​Black/tannin stains e.g. rings/stains from cans, flower pots, etc.
• Can also be used:
  - after water damage on parquet..
  - in case of efflorescence on exterior wood (on the bottom of gates,
      doors, on walls).
• Can be used on untreated, oiled and waxed surfaces.
• Also suitable for outdoor applications!
• Packaging: 0.5 L ecospray spritzer or 100ml bottle (non-spray).

INSTRUCTIONS:

• 1. Spray RMC Tannin Remover on the spot or stain.
• 2. Allow several minutes for absorption.
• 3. Use a damp cloth to remove the stain.
• 4. To remove stubborn stains, it is recommended to repeat the process until the desired result is achieved.
• 5. Allow the surface area to dry.
• 6. If the protective layer is affected: treat the surface area again with RMC Oil Plus 2C.

We highly recommend that you first test the product on a non-visible part of the wood, to test the effect of the product on your specific wood type. We are not responsible for any consequences due to incorrect use.

TIPS:
› After a treatment with RMC Tannin Remover, you may need to apply some oil in the original colour on the spot.
› If the surface becomes too stain-sensitive, maintain with RMC Oil Plus 2C (in the original colour applied) to repair both colour and protection.

TECHNICAL CHARACTERISTICS:
Physical state (20 °C): semi-viscous, liquid
Look/colour: opaque
Odour: odourless
Density (20 °C) (ASTM D 4052): 1,01 kg/L
Solubility: soluble in water
STORAGE: The product can be stored for up to 24 months. Store in dry conditions and in the original packaging. Do not allow to freeze.
PACKAGING: Ecospray 0,5 L and bottle 1 L