WOCA Worktop Kit is used for oil treatment and maintenance of worktops and other indoor wood surfaces. The oil is easy to work with and creates a durable surface with high resistance. The kit contains all you need for the entire treatment: 0.75 L Worktop Oil, 250 ml. Intensive Wood Cleaner, black sanding pad, white polishing pad, one lint-free cloth, one pair of gloves and work instructions.
A highly water- and dirt-repellent oil for wood surfaces.
This box contains:
- 0.75 Litre Woca Worktop Oil
- 50ml Wood Cleaner
- 2 Polishing pads
- 1 set of gloves
- 1 lint free oiling cloth
Worktop Oil is designed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface highly water -and dirt-repellent. Use Worktop Oil, Natural, on both dark and light wood species – such as mahogany, merbau, teak, cherry, ash, oak, beech, maple, birch, pine etc. - to give the wood a mellow, golden colour. Use Worktop Oil, White, to lighten up the wood or give it a whitewashed effect.
12-15 m2/l 129-161 sq.ft./l
How to apply
If the surface is particularly smooth, sand the surface with sandpaper grit 180. Make sure the wood is dry and devoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours.
Stir the oil thoroughly before use. *Use a paintbrush to apply a suitable amount of oil in an even, adequate coat
Wait approx. 20-30 minutes at 20º C as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet in wet lengthwise the wood grain with sandpaper grit 320-400. Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface.
Carefully polish the wood using a white polishing pad, which makes the surface more hard-wearing. *Repeat the treatment on highly absorbent surfaces. *The oil is thoroughly hardened after 24 hours at 20º C. Do not let the tabletop become wet during the hardening process. Maintenance: Use Worktop Oil to maintain the tabletop four times a year, or as often as necessary. Always clean the worktop first using Wood Cleaner. Follow the same procedure, but apply only one coat of oil. Risk of self-ignition: Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.
Free Shipping on this Product - UK Mainland only - Excludes: Scottish Highlands and Islands